Synthesis and adsorption performance of fly ash/steel slag‐based geopolymer for removal of Cu (II) and methylene blue

Abstract

AbstractIn order to realize the value‐added resource utilization of solid waste, geopolymer particle adsorbents were prepared at low temperatures using silica‐aluminum‐rich fly ash and steel slag powders as raw materials. In order to investigate the mechanism of their adsorption of dyes and heavy metal ions from wastewater, the effects of steel slag/fly ash ratio, adsorbent dosage, initial concentration of methylene blue (MB) and Cu2+ solution, adsorption time and temperature on the adsorption performance of the fly ash/steel slag‐based geopolymer adsorbents were investigated, systematically. Results presented that the adsorption capacities of MB and Cu2+ were 33.30 and 24.15 mg/g, and the removal efficiencies were 99.90% and 96.59% with the dosages of 3 and 4 g/L geopolymer adsorbents (steel slag/fly ash ratio of 20 wt.%), respectively. The adsorption processes of MB and Cu2+ on the adsorbents were in accordance with the proposed pseudo‐second‐order and Langmuir isotherm models, which mainly included physical and chemical adsorption mechanisms. The adsorption was a spontaneous endothermic process. The fly ash/steel slag‐based geopolymer had good removal ability for dyes and heavy metal ions, and it could maintain good adsorption performance after three cycles of regeneration. It had potential application in wastewater treatment.