Synergistically Achieving Superior Sodium Storage of Metal Selenides by Constructing N-Doped Carbon Foams and Utilizing Cu-Driven Replacement Reaction.

Abstract

Metal selenides are considered as one of the most promising anode materials for Na-ion batteries owing to high specific capacity and relatively higher electronic conductivity compared with metal sulfides or oxides. However, such anodes still suffer from huge volume change upon repeated Na+ insertion/extraction processes and simultaneously undergo severe shuttle effect of polyselenides, thus leading to poor electrochemical performance. Herein, a facile chemical-blowing and selenization strategy to fabricate 3D interconnected hybrids built from metal selenides (MSe, M = Mn, Co, Cr, Fe, In, Ni, Zn) nanoparticles encapsulated in in situ formed N-doped carbon foams (NCFs) is reported. Such hybrids not only provide ultrasmall active nanobuilding blocks (≈15nm), but also efficiently anchor them inside the conductive NCFs, thus enabling both high-efficiency utilization of active components and high structural stability. On the other hand, Cu-driven replacement reaction is utilized for efficiently inhibiting the shuttle effect of polyselenides in ether-based electrolyte. Benefiting from the combined merits of the unique MSe@NCFs and the utilization of the conversion of metal selenides to copper selenides, the as-obtained hybrids (MnSe as an example) exhibit superior rate capability (386.6 mAh g-1 up to 8 A g-1 ) and excellent cycling stability (347.7 mAh g-1 at 4.0 A g-1 after 1200 cycles).