Synergistic Redox Modulation for High-Performance Nickel Oxide-Based Inverted Perovskite Solar Modules.

Abstract

Nickel oxide (NiOx )-based inverted perovskite solar cells stand as promising candidates for advancing perovskite photovoltaics towards commercialization, leveraging their remarkable stability, scalability, and cost-effectiveness. However, the interfacial redox reaction between high-valence Ni4+ and perovskite, alongside the facile conversion of iodide in perovskite into I2 , significantly deteriorates the performance and reproducibility of NiOx -based perovskite photovoltaics. Here, potassium borohydride (KBH4 ) is introduced as a dual-action reductant, which effectively avoids the Ni4+ /perovskite interface reaction and mitigates the iodide-to-I2 oxidation within perovskite film. This synergistic redox modulation significantly suppresses nonradiative recombination and increases the carrier lifetime. As a result, an impressive power conversion efficiency of 24.17% for NiOx -based perovskite solar cells is achieved, and a record efficiency of 20.2% for NiOx -based perovskite solar modules fabricated under ambient conditions. Notably, when evaluated using the ISOS-L-2 standard protocol, the module retains 94% of its initial efficiency after 2000 h of continuous illumination under maximum power point at 65°C in ambient air.