Synergistic Impact of Electrolyte Components: Interplay between the Novel Phosphorus-Based Additives and Conducting Salt Advancing NMC811||SiC Cell Performance

Abstract

A lithium-ion battery (LIB) typically consists of an anode, a lithiated transition metal oxide cathode, and an electrolyte formulation containing inorganic lithium conducting salt in aprotic organic solvents/co-solvents, and functional additives. In-depth research is being conducted in order to develop novel chemistries for the next-generation LIBs. Within the line, silicon-based anodes and nickel-rich cathodes are recognized as two feasible next-generation electrode materials. The long-term galvanostatic cycling performance of resulting cell chemistries relies on the effectivity and robustness of solid electrolyte interphase (SEI) and cathode electrolyte interphase (CEI) formed during the initial cycles and originate from the galvanostatic cycling conditions, as well as the complex interplay between electrolyte and corresponding electrodes .[1] To enhance the SEI and CEI properties, implementing functional electrolyte additives into baseline electrolyte has been shown to be one of the most effective and cost-favorable strategies. Film-forming additives sacrificially reduce and/or oxidize at corresponding electrodes to form protective layers (SEI and CEI).Previous research has shown that phosphorus-based additives improve electrode |electrolyte interfaces stability and simultaneously enhance cell flame-retardant capability advancing the overall cell performance.[2,3] In this report, we indicated part of the above-mentioned properties originate from the synergy between lithium hexafluorophosphate (LiPF6) which is the state-of-the-art (SOTA) electrolyte conducting salt in LIBs and considered functional additives. Here, we demonstrated the functionality of 2-phenoxy-1,3,2-dioxaphospholane (PhEPi) as a novel film-forming additive[4] and 2,2,4,4,6-pentafluoro-6-(2,2,2-trifluoroethoxy)-1,3,5,2λ5,4λ5,6λ5-triazatriphosphinine (CF3PFFPN) as a new flame-retardant additive, synthesized for the first time by our group. The presence of PhEPi and CF3PFPN at the optimum concentrations in the baseline electrolyte (1 M LiPF6 in EC: EMC 3:7 + 8 % VC) enhances the performance and safety of the resulting NMC811||Si-graphite (20% Si) cell chemistry. Impact of phospholane-based additive was confirmed by substituting LiPF6 with LiBF4 conducting salt and complementary post mortem analysis. This study along with improved cell chemistry, provided a better understanding and deeper insights into the synergistic interplay and impact of considered electrolyte components on the resulting NMC811||Si-graphite cell chemistry. [1] C. Wölke, B. A. Sadeghi, G. G. Eshetu, E. Figgemeier, M. Winter, I. Cekic-Laskovic, Advanced Materials Interfaces 2022, 9, DOI 10.1002/admi.202101898.[2] N. Von Aspern, D. Diddens, T. Kobayashi, M. Börner, O. Stubbmann-Kazakova, V. Kozel, G. V. Röschenthaler, J. Smiatek, M. Winter, I. Cekic-Laskovic, ACS Applied Materials and Interfaces 2019, 11, 16605–16618, DOI 10.1021/acsami.9b03359.[3] N. von Aspern, C. Wölke, M. Börner, M. Winter, I. Cekic-Laskovic, Journal of Solid State Electrochemistry 2020, 24, 3145–3156, DOI 10.1007/s10008-020-04781-1.[4] B. A. Sadeghi, C. Wölke, F. Pfeiffer, M. Baghernejad, M. Winter, I. Cekic-Laskovic, Journal of Power Sources 2023, 557, 232570, DOI 10.1016/j.jpowsour.2022.232570.