Synergistic effects of anionic polyacrylamide and gypsum to control phosphorus losses from biogas slurry applied soils

Abstract

Excessive application of phosphorus (P) fertilizer to the agriculture soil can lead to the P loss to the aquatic ecosystem. Three soils from different land use (tea, paddy, and vegetable soils) were treated with biogas slurry (BS) at rate of 79.8 kg ha−1, anionic polyacrylamide (PAM) at rate of 12.5, 25 and 50 kg ha−1, Gypsum (Gy) at rate of 5t ha−1, and the control (Ck) without treatment, to control P losses in a laboratory batch experiment. The soil solution was analyzed for total P (TP), dissolved reactive P (DRP) and total dissolved P (TDP). Particulate P (PP) and dissolved unreactive P (DURP) were calculated by subtracting DRP from TP and TDP, respectively. The DRP was within a range of 68–98% of TP whereas PP varied in a range of 2–32% of TP and DURP was within a range of 0.1–19% of TP, depending on soil types and different treatments. The addition of PAM at a high rate and Gy together on the soil after BS application reduced the release of TP by 54, 46, and 51% and that of DRP by 61, 49, and 53% for tea, paddy and vegetable soils, respectively. However, the application of BS with PAM alone promoted the release of DRP by 77, 86, 70% for tea, paddy, and vegetable soils, respectively. This study suggests that the synergic application of PAM and Gy on soils after BS addition can be a good strategy to reduce P losses.