Abstract
Purpose This paper aims to deal with the synergistic effect of steel slag-molybdenum disulfide particles on fade-recovery performances of non-asbestos organic friction material. Design/methodology/approach The brake friction materials were developed by using steel slag and molybdenum disulfide particles as individual and combination in the formulation. The brake friction materials were developed in the form of standard brake pads as per the industrial practice. The physical, mechanical and thermal properties of the developed brake pads were tested as per the industrial standards. The tribological properties were analyzed using the Chase test as per IS2742-Part-4. Worn surface analysis was done using a scanning electron microscope. Findings The experimental results indicate that the brake pads filled with a combination of steel slag and molybdenum disulfide showed stable friction and less wear rate due to the synergetic nature of abrasive and lubricant. Originality/value This paper explains the influence of steel slag and molybdenum disulfide particles as individual and combined in brake pads formulation to enhance the tribological performance by producing stabilized friction with undulations. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-06-2020-0216/
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.