Synergistic effect of multifunctional POSS and carbon nanotubes on mechanical properties and thermal stability of silicone rubber composites

Abstract

AbstractThe over‐loading of heat‐resistant fillers in silicone rubber creates a contradiction between heat resistance and mechanical properties, thus greatly limiting the durability of silicone rubber products in cutting‐edge applications and complex scenarios. To address this issue, silicone rubber was filled with octavinyl polyhedral oligomeric silsesquioxane (POSS) and carbon nanotubes (CNT) and crosslinked with 2,5‐dimethyl‐2,5‐di(tert‐butylperoxy)hexane (DBPMH) in an attempt to obtain composites with excellent mechanical properties and great thermal stability. Optical microscopy and X‐ray diffraction analyses revealed the size of POSS crystals decreased and the characteristic peaks disappeared after the peroxide crosslinked the polymer at elevated temperature. Specifically, silicone rubber composite filled with 0.1 phr POSS and 1.0 phr CNT exhibited a tensile strength of 10.2 MPa and elongation at a break of 450%. Further, the strength and elongation could be kept after thermo‐oxidative aging at 250°C for 32 h. Thermogravimetric analysis results demonstrate that the addition of POSS and CNT into silicone rubber exhibits a synergistic effect, markedly improving the thermal stability of the material. This method provides a valuable reference for manufacturing silicone rubber products that possess both excellent mechanical properties and high thermal stability under extreme working conditions.Highlights A novel silicone rubber composite with excellent mechanical properties and thermal stability was prepared. A small amount of octavinyl polyhedral oligomeric silsesquioxane (POSS) and carbon nanotubes exhibited a synergistic effect to improve thermal stability. The dependence of the morphological evolution of POSS crystals in SR on the 2,5‐dimethyl‐2,5‐di(tert‐butylperoxy)hexane and temperature was studied.