Synergistic effect of Mn and B on the cohesive properties of grain boundaries in Ni3Al: A first-principles study

Abstract

Ni-based superalloys are known as potential structural materials under extreme conditions due to their good high temperature properties. However, some alloys such as Ni3Al exhibit intrinsic brittleness which severely restricts their practical applications as structural materials. It is well known that the moderate addition of B can significantly improve the ductility of Ni3Al grain boundaries (GB) but restricted to the Ni-rich side. Adding Mn together with B can improve the ductility of Ni3Al in a wider composition range. To provide some fundamental understandings on such a cooperative effect, the segregation of Mn or/and B to the Ni3Al GBs and their effects on the cohesive properties of the GBs are systematically investigated by using a first-principles method. It is shown that B tends to segregate to the Ni-rich holes of the GBs, which means that B prefers to form stronger covalent bonds with the Ni atoms. The calculation of Griffith’s work shows its improved effect on the cohesion of the GBs. Different from site occupation tendency in bulk Ni3Al, Mn tends to segregate to the GBs and substitute the Ni sites at the GBs. It is interesting to notice that B can segregate to the Ni-deficient hole and improve the cohesive properties of the GBs in the presence of Mn substituting Ni atoms at the GBs. Whether at the Ni-rich holes or Ni-deficient holes of B segregation, Mn substituting the Al sites won’t take place at the GBs. The improvement of the ductility of composition-dependent Ni3Al extends from the Ni-rich side to the stoichiometric side with the co-doping of Mn and B. The electronic structure mechanism behind is discussed based on the calculated electronic density of states. It is suggested that the beneficial cooperative effect of Mn and B on the cohesive properties of the GBs is attributable to the increasing B-Al interaction.