Abstract
Abstract The tribological properties of ionic liquid (IL) trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl) phosphinate along with Al2O3, CuO, and SiO2 nanoparticles (NPs) have been investigated as a lubricant additive in a group 1 mineral base oil. About 0.5 wt% concentration of additives were added in base oil, and tribological tests were conducted at mild (stipulated) and severe (ASTM D 4172D) working conditions to assess the synergy between IL and NPs. This study shows the excellent synergy between IL, Al2O3, and CuO NPs in improving tribological and extreme pressure (EP) properties. Al2O3 and CuO hybrid nanolubricants decreased friction by 19% and 24%, whereas wear by 32% and 36%, respectively, at ASTM test conditions. IL displayed very good EP properties with a total improvement of 19%, and the highest load-bearing capacity was observed for Al2O3 and CuO hybrid nanolubricants with an improvement of 30% and 34%, respectively. No conclusive evidence of synergy has been observed between IL and SiO2 NPs. Surface characterization techniques, such as scanning electron microscope, energy dispersive X-ray spectrometer, and Raman spectra, demonstrated the formation of a tribofilm rich in phosphate and tribosintered NPs on the worn surface responsible for improved triboperformances.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
