Abstract

Synergism of Saccharum officinarum (sugarcane) and Ananas comosus (pineapple) extract additives on the quality of electroplated zinc on mild steel in acid chloride solution was investigated experimentally at ambient temperature (*28 C). The experiments were performed at different plating times (15 and 18 min), additive concentrations (2, 2.5, 3 ml/50 ml of acid chloride solution), pH 5, temperature (27-30 C), current (0.08 A), and voltage (13 V DC) conditions. Zinc electroplating on mild steel was performed using a DC-supply. The surface of the plated steel was examined with scanning electron microscopy, and energy dispersive spectroscopy for surface elemental composition analysis. Different sur- face characteristics were obtained depending upon the concentration of the additive and the plating time. The corrosion resistance of the plated surface was determined by a gravimetric method. Microstructural morphology of the plated surface indi- cated a good quality electroplating that was better than either the sugarcane or pineapple extracts alone. The electroplating process was sensitive to changes in additive concentration and plating time. Any variation in the plating parameter produced an entirely new and different surface crystal morphology.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.