Synergetic effects of organic and inorganic additives on improvement in hydrophilicity and performance of PVDF antifouling ultrafiltration membrane for removal of natural organic material from water

Abstract

AbstractSurrounding vegetation, animal, human and microbiological decomposition are the strong source of humic acid (HA) falling into the surface water bodies through rain runoff in the monsoon. HA contains various functional groups, such as carboxylic, phenolic, hydroxyl, and quinine, which are the major foulant. Contact of HA may have an adversarial health issue to human beings namely goiter, black foot, and cancer disease. The maximum permissible limit of HA in drinking water should be less than 2 ppm as per the Environmental Protection Agency (EPA). The membrane technology has prevailed a prominent place worldwide in chemical, water and wastewater treatment technologies. The proposed work is focused on the blending of organic‐water soluble polymer polyethylene glycol 6000 as a pore‐forming agent and inorganic salt lithium bromide (LiBr) as membrane morphology modifier with polyvinylidene fluoride host polymer in the N,N‐Dimethylacetamide solvent. All fabricated membranes were characterized for functional groups and morphology. The total number of pores per unit surface area of membrane for membranes M‐LiBr‐0, M‐LiBr‐1, M‐LiBr‐2, and M‐LiBr‐3 are 2 × 1013, 2.3 × 1014, 2.7 × 1014 and 2.82 × 1014, respectively. The static water contact angle was decreased from 68.2° to 50.6° with an increase in the content of LiBr from 0 to 3 wt%. The order of pure water flux and hydraulic permeability of the membrane was M‐LiBr‐0 < M‐LiBr‐1 < M‐LiBr‐2 < M‐LiBr‐3. The HA rejection of the membrane was also increased from 90.13% to 96.24% with LiBr content due to a decrease in pore size of the membrane with the addition of LiBr content.