Synchrophasor Data Based Q-V Droop Control of Wind Farm Integrated Power Systems

Abstract

With increasing scalability of grid-integrated wind farms (WFs), reactive power ancillary service through Q-V droop control of doubly-fed inducton generators (DFIGs) is one of the prime interests of power system operators. However, variable and uncertain availability of wind-resource at the wind turbines creates challenge against allocating reactive power reserve at the WFs for maintaining voltage stability of the grid. This issue can be resolved through online coordination among the WFs. This paper proposes a synchrophasor data based Q-V droop (SQVD) control technique for the WFs integrated to the grid through different point of common couplings (PCCs) in the power system transmission network. The data from the phasor measurement units (PMUs) at the WF-connected PCCs are used to obtain synchronized Q-V droop gain for each WF. Further, distributed coordination among DFIGs within each WF is performed to allocate optimum reactive power share at the converters. The total reserve of each WF is employed by their synchronized droop, in improving voltage stability at both the local PCC and neighboring PCCs. Performance of SQVD is verified at 418-bus practical Indian power system, in different dynamic situations of the grid, and found to be more effective as compared to the constant Q-V droop and variable Q-V droop control methods.