Switching Frequency Reduction Using Model Predictive Direct Current Control for High-Power Voltage Source Inverters

Abstract

In this paper, a novel current control approach called model predictive direct current control (MPDCC) is presented. The controller takes into account the discrete states of the voltage source inverter (VSI), and the current errors are predicted for each sampling period. Voltage vectors are selected by a graph algorithm, whereby the most appropriate vector is chosen based on an optimization criterion. However, this depends on whether the state of the system is transient or steady. In the first case, the current error should be minimized as fast as possible in order to obtain fast dynamics. In the latter one, the VSI switching behavior is optimized since the switching losses account for a large amount of the total converter losses in high-power drive systems. MPDCC has been developed for a general neutral-point isolated resistive-inductive load with an internal voltage source. For demonstration, the presented control strategy has been implemented on a small-scale permanent-magnet synchronous machine drive system with a two-level VSI. This new approach has several advantages. The most important one is that the switching frequency is reduced up to 70% compared to linear control combined with pulsewidth modulation. Second, MPDCC obtains fast dynamic responses, which are already known from, e.g., direct torque control.