Abstract
The swirling flow in a tube with the outlet designed in the form of an orifice nozzle with centered and eccentrical openings, investigated experimentally by Grundmann et al. (2012), was studied computationally by employing Large Eddy Simulation (LES) method and a Hybrid LES/RANS (Reynolds-Averaged Navier–Stokes) method. The latter method, denoted by VLES (Very Large Eddy Simulation) according to Speziale (1998), represents a variable resolution computational scheme enabling a seamless transition from RANS to the direct numerical solution of the Navier–Stokes equations (DNS) depending on the ratio of the turbulent viscosities associated with the unresolved scales corresponding to the LES cut-off and the ‘unsteady’ scales pertinent to the turbulent properties of the VLES residual motion, which varies within the flow domain. Before computing the swirling pipe configuration, the VLES model is interactively validated in the process of the model derivation in some generic flows featured by natural decay of the homogeneous isotropic turbulence and separation from a curved continuous surface. The background RANS model representing the basis of the VLES method is the eddy-viscosity-based ζ-f model proposed by Hanjalic et al. (2004). The inflowing swirl generated by two tangential inlets has the same intensity in all cases considered. However, the abrupt outlet cross-section contraction created by variably-shaped orifices causes strong modification of the flow within the tube resembling a three-layered structure characterized by an alternating axial velocity directions. Both LES and VLES methods, unlike the RANS method employing the same turbulence model, returned such a behavior in good agreement with experimental data.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.