Abstract
The swirling flow field in an internal cooling air system in which the fluid passes through an inducer, a hollow turbine shaft, and a cavity between two disks (referred to as a wheel space) is solved using computational fluid dynamics and the pressure fluctuations on the hollow shaft wall surface are measured.The three‐dimensional compressible Navier‐Stokes equations are adopted and discretized by an implicit TVD scheme. The region of the cooling air system is divided into two computational domains: one from the inducer to the hollow shaft, and the other from the hollow shaft to the wheel space. In the analysis of the former computational domain, the roles of components such as inducer blades are shown. In the analysis of the latter, the existence of a rotating spiral vortex at the place where the swirling flow turns radially outward is shown and its characteristics are described.The main part of the internal cooling air system of a gas turbine is used as an experimental apparatus. Pressure sensors are embedded axially and circumferentially in the hollow turbine shaft to measure unsteady wall pressures. The existence and characteristics of the rotating spiral vortex are confirmed experimentally. The pressure fluctuations due to instability in the rotating wall boundary layer, whose waves propagate both in the positive and negative directions of the shaft rotation, are captured.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.