Sustainable valorization of recycled low-density polyethylene and cocoa biomass for composite production.

Abstract

The development of products from wastes such as plastic and lignocellulosic materials brings great advantages from the economic and sustainable point of view. The use of waste, previously destined for disposal, enables the changes in production patterns, and prevents major environmental problems. This research investigated the inclusion of different contents of cocoa almond husk on the properties of composites with recycled low-density polyethylene (LDPE) matrix. The composites were produced by extrusion process with proportions: 0%, 10%, 20%, 30%, and 40% of cocoa waste reinforcement in the polymer matrix. The density of the composites decreased (from 0.81 to 0.61 g/cm3) with the addition of the lignocellulosic waste in the matrix. The hygroscopicity was increased, however, at considerably low levels (0.17 to 2.68 %). There was a decrease in composite strength and elongation, becoming the material more rigid. The use of the cocoa waste for composites production is feasible to use since it can be adapted to the required application and still incorporate additives requested for specific purposes. This research demonstrated that is possible the combination of recycled low-density polyethylene and lignocellulosic wastes for the production of materials with high added value.