Sustainable biohythane production from algal bloom biomass through two-stage fermentation: Impacts of the physicochemical characteristics and fermentation performance

Abstract

Algal bloom biomass, sourced from a freshwater lake in Chongqing, was pre-treated by hydrothermal pre-treatments with or without acid/alkali catalysts, and subsequently used as a substrate for sustainable biohythane production via fermentation. Fourier transform infrared (FTIR) spectroscopy analyses suggested hydrothermal acid/alkali pre-treatments significantly changed peak intensities of chemical compositions in algal bloom biomass. Derivative thermogravimetric (DTG) analyses showed more macromolecular substances hydrolysed after hydrothermal acid/alkali pre-treatments. When bloom algae were pre-treated with 1% HCl at 140 °C for 10 min, an optimal specific hydrogen yield (SHY) of 39.4 mL/g volatile solid (VS) was obtained, which is 38.2% higher than raw biomass. However, a 34.4% decrease in SHY occurred under hydrothermal pre-treatment with 1% NaOH due to the enhancement of Maillard reaction. When using the effluents in methane fermentation, specific methane yields (SMYs) were 177.1–276.8 mL/g VS. Two-stage process effectively reduced the total fermentation time by 22.7% compared with single-stage fermentation.