Abstract
Biocement production from microbially induced calcium carbonate precipitation (MICP) is an environmentally friendly approach for construction works, but the use of calcium chloride (CaCl2) in the conventional MICP process is a cost-limiting factor. The aim of this work is to develop a method for producing soluble calcium ions through two waste sources, limestone powder derived from aggregate quarries and acetic acid derived from fast pyrolysis of lignocellulosic biomass, as a replacement for the reagent grade CaCl2 in the MICP process. The ratio of limestone powder to acetic acid solution was optimized for a desirable calcium concentration with an appropriate pH. Procedures for applying the urease-producing bacteria, urea, and calcium solutions were developed for a successful MICP process and were treated for sand column test. The engineering properties of the biocemented sand, including water permeability, unconfined compressive strength, and tensile strength, were evaluated as a function of the calcium ...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.