Sustainable Approach for Cellulose Aerogel Preparation from the DBU–CO2 Switchable Solvent

Abstract

We report a sustainable and easy approach for the preparation of cellulose-based aerogels from the DBU–CO2 switchable solvent system via a solubilization and coagulation approach followed by freeze-drying. The easy, fast, and mild solubilization step (15 min at 30 °C) allows for a rapid preparation procedure. The effect of various processing parameters, such as cellulose concentration, coagulating solvent, and the superbase, on important aerogel characteristics including density, porosity, pore size, and morphology, were investigated. Density values obtained ranged between 0.05 and 0.12 g/cm3, with porosity values between 92% and 97%. The morphology of the obtained cellulose aerogels was studied using scanning electron microscopy (SEM) showing a random and open large macroporous cellulose network with pore sizes ranging between 1.1 and 4.5 μm, depending on the processing conditions. In addition, specific surface areas determined by N2 adsorption applying the BET equation ranged between 19 and 26 m2/g. The...