Abstract

Aim of study: to assess the natural durability of Populus x euramericana ‘I-214’ against xylophagous fungi and termites, and to carry out a macro-microscopic analysis of the alterations caused by each xylophagous agent in order to get the necessary information for its possible inclusion in existing European standards.Area of study: A 20-years-old commercial plantation Populus x euramericana‘I-214’ located in Quintanilla de Sollamas (42° 36′ 00″N - 05° 49′ 00″ W), Spanish community of Castile-LeonMaterial and methods: material sampling and selection was carried out following EN 350:2017 for commercial sawn timber. Poplar resistance to xylophagous basidiomycete, soft rot fungi and subterranean termites was determined according to CEN/TS 15083-1:2005, CEN/TS 15083-2:2005 and EN 117:2012, respectively. The durability and use classes were estimated according to EN 350:2016 and EN 335:2013, respectively. The anatomical studies were carried out with Optical and Scanning Electron Microscope. Material characterization was carried out by reference to Anagnost (1998) and Schwarze (2007).Main results: ‘I-214’ poplar wood proved to be “Not-durable” to the action of basidiomycetes, soft rot fungi and termites, use classes 1-2, and showed macro-microscopic evidence of these types of decay.Research highlights: the information obtained in this study would allow the inclusion of clone I-214 in the standard EN 350 and its explicit classification within it.Keywords: wood-decay fungi; termites; EN 350.Abbreviations used: TM: test material; RM: reference material; RH: relative humidity; ML: mass loss; mi: initial dry mass; mf: final dry mass; DC: durability class; OM: Optical Microscope; SEM: Scanning Electron Microscope; TS: transverse section samples; LS: longitudinal section samples; CI: robust confidence intervals; F: fibre; V: vessel; h: hole; t: erosion trough; R: radial parenchyma cell; ep: erosion pitting; Fc: fungal colonization; fr: fracture; c: cavity; b: bore hole; m: mycelium.

Highlights

  • IntroductionPopulus (poplar) species or clones has been carried out in several countries with the aim of obtaining raw material of economic, social and environmental interest (Castro & Fragnelli, 2006; Kollert & Borodowski, 2014; Del Lungo, 2017)

  • The planting of fast-growing species such as somePopulus species or clones has been carried out in several countries with the aim of obtaining raw material of economic, social and environmental interest (Castro & Fragnelli, 2006; Kollert & Borodowski, 2014; Del Lungo, 2017)

  • The test material (TM) was received as 50 mm x 150 mm x 3000 mm beams which were conditioned in laboratory to achieve equilibrium moisture content at 12 + 2%

Read more

Summary

Introduction

Populus (poplar) species or clones has been carried out in several countries with the aim of obtaining raw material of economic, social and environmental interest (Castro & Fragnelli, 2006; Kollert & Borodowski, 2014; Del Lungo, 2017). Within this context, Spain ranks among the 10 countries with the largest cultivated land areas and highest wood extraction of Populus spp. The use of this wood has been associated mainly with the manufacture of chipboards

Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call