Abstract
Over the past few decades, researchers have become increasingly interested in the Stewart Platform, a parallel manipulator with six degrees of freedom (DOF) that offers remarkable functionality over serial manipulators. The main objection to the implementation of closed loop control in Stewart Platform is its difficulty in solving the forward kinematics. In the forward kinematics problem, the pose and orientation of the moving platform are determined from the leg lengths. This is a high degree nonlinear problem with multiple solutions. Even though many studies were conducted about the kinematics of parallel robots, forward kinematics continues to be a hindrance to its practical application. Consequently, the real-time solution of forward kinematics is gaining interest. To address the direct kinematics problem, several approaches were presented, including numerical techniques, analytical methods, sensor-based methods, methods using neural networks, and observer-based methods. In this paper, the different approaches and limitations of the forward kinematics problem on Stewart Platform are analyzed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.