Abstract
In this study, a sampling campaign was conducted for 29 buildings on the National Taiwan University (NTU) campus where lead pipes were present in 4 buildings. Total lead, soluble lead, and water quality parameters including pH, temperature, residual free chlorine, and total organic carbon were measured. Results from the first-round sequential sampling (10×100mL) showed that the presence of lead pipe did not necessarily cause elevated lead levels. However, the highest lead concentration and the highest frequency of exceeding 10μg/L were detected in a building with lead pipe. Faucet was identified to be a major lead source in at least 8 buildings. No significant correlations between lead levels and water parameters were found. The building showing the highest lead level in the first round was sampled for a second round using four different methods, namely, first draw sampling, random daytime sampling, sequential sampling (5×1L), and flushing sampling. Lead levels in samples collected using the four sampling methods all exceeded 10μg/L. The first draw sampling showed the highest lead level, followed by comparable levels for random daytime sampling and sequential sampling. Flush sampling yielded the lowest lead concentration. Particles collected from the faucet aerators in 14 buildings were also characterized for their compositions and lead contents.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Environmental science and pollution research international
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.