Abstract
This report describes a protocol that uses computer technology and medical imaging to virtually place anterior and posterior dental implants and to construct a precise surgical template and prosthesis, which is connected at the time of implant placement. This procedure drastically reduces patient office time, surgical treatment time, and the degree of post-treatment recovery. Patients with an edentulous arch or a partially edentulous area had a denture with radiopaque markers constructed for computed tomography (CT) scans of the appropriate jaw. The CT images, having acquisition slices of 0.4 mm, are transposed in a three-dimensional image-based program for planning and strategic placement of dental implants. After virtual implant placement on the computer, the surgical treatment plan is sent to a manufacturing facility for construction of the surgical template. The manufactured surgical components and surgical template arrive on the clinical site. From the surgical template, the dental laboratory retro-engineers the master cast, articulates it with the opposing dentition based on a duplicate of the scanning denture, and creates the prosthesis. Using the surgical template, minimally invasive surgery is performed without a flap, and the prosthesis is delivered, achieving immediate functional loading to the implants. Minor occlusal adjustments are made. The total surgical treatment time required is typically between 30 and 60 minutes. Postoperative symptoms such as pain, swelling, and inflammation are dramatically reduced. Identification of the bone in relationship to the tooth position via three-dimensional CT prior to surgery allows the clinician to precisely place implants. Computer-aided design/computer-assisted manufacture technology using the three-dimensional images allows for fabrication of the surgical template. This is a significant advancement in implant dentistry and promotes interdisciplinary approaches to patient treatment. The implant surgeon and restorative dentist can agree upon implant locations and screw access locations prior to the surgical episode.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have