Abstract
ABSTRACT Short-term aging (rolling thin-film oven test) of an asphalt binder resulted in the production of surfactants (surface-active compounds), while long-term aging (pressure aging vessel test) of asphalt binders resulted in the production of not only surfactants but also strong acids. The strong acids were identified as being sulfonic acids. It was proposed that the generation of surfactants and/or sulfonic acids in asphalt binder would promote moisture damage in asphalt-aggregate mixes. The surfactants could act as a detergent and emulsify components of the mix, and sulfonic acids could attack the aggregate surface, thus, disrupting the asphalt-aggregate interface. A model compound, p-dodecylbenzenesulfonic acid, which incorporates these two structural features, was used as a modifier in several different mixes. Briquets fabricated from the modified mixes were tested for moisture susceptibility using the freeze-thaw pedestal test. It was observed that those mixes, which were originally not susceptible to moisture damage, were now susceptible. It was also noted that the addition of lime to the aggregates prior to the fabrication of the briquets counteracted the influence of p-dodecylbenzenesulfonic acid.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.