Surface Wave-Based Health Monitoring Method for a Sheet Pile Quay Wall

Abstract

Port structures such as pile supported piers and quay walls generally face severe conditions, and deterioration of port structures is often observed. For an example, at a sheet pile quay wall, sheet pile is a structural component which is easily deteriorated by corrosion. As a result of deterioration of sheet pile, the backfilled soil would be washed out due to the tidal action. Suffusion, the phenomena of the washed out of fine particles and loosening of soil layer, is a problem to be considered in the maintenance of a quay wall. Therefore, a health monitoring method for the backfill of a sheet pile quay wall is necessary. In this study, the applicability of a surface-wave method for health monitoring of a sheet pile quay wall was examined. First, the variation of shear wave velocity in the ground due to suffusion and variation in water content is measured from bender element tests. Then, 2D finite element method (FEM) dynamic analysis was conducted to simulate a surface-wave measurement on a sheet pile quay wall. From the result of the analysis, the estimated shear wave velocity profile based on surface-wave method agrees fairly well with the assumed soil profile. Finally, surface-waves were measured at a sheet pile quay wall, and the measured results were compared with the result of Swedish weight sounding test at the site. Furthermore, the difference between the shear wave velocity profiles at ebb tide and that at high tide was successfully measured by the surface-wave method. Thus, the applicability of the surface-wave method for a sheet pile quay wall is demonstrated in this study.