Abstract

Surface subsidence associated with the construction of a headrace tunnel in the Swiss Alps at more than 2000 m above sea level (a.s.l.) has been detected at two locations with satellite differential Synthetic Aperture Radar (SAR) interferometry. At the first location, a subsidence trough of about 4 cm in the satellite line-of-sight direction following the headrace tunnel axes has been measured between August 1995 and August 1996. Similar values from SAR data of ascending and descending orbits indicate displacements in the vertical direction of the movement. In the second case, a symmetric cone of depression with a maximum displacement of about 4 cm between 1995 and 1997 has been observed above the tunnel. Differences in the results from satellite SAR data of ascending and descending orbits indicate that the direction of displacement in this second case was not entirely vertical. Large-scale consolidation associated with pore-pressure reduction in the rock mass arising from tunnel drainage at about 200–400 m depth beneath the topographical surface is believed to be the contributing mechanism (Zangerl et al., 2008a, 2008b). Evidence for this process is based on pore pressure recordings in nearby deep wells. In both areas, the subsidence was followed by a small uplift of about one centimeter between 1997 and 1999, after the tunnel was cased with permeable concrete segments. This partial recovery is also visible in pore pressure records and can be related to the elastic components of rock mass deformation.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call