Abstract
The performance of two complementary optical strain measurement techniques, speckle shearing interferometry (shearography) and fibre Bragg grating (FBG) sensors, is compared with that of resistance foil strain gauges (RFSGs) and with theoretical predictions. The test object used for the surface strain measurements was a hydrostatically loaded ABS pipe. A multi-component shearography instrument, capable of full surface strain measurement, was used to determine the displacement gradient components, from which the surface strain components were calculated. Six surface mounted wavelength division multiplexed FBG sensors were used to measure the axial and the hoop strains. RFSGs located on the surface of the pipe, adjacent to the FBGs, were used for comparison. Reasonable agreement between theory and the axial and hoop strains determined by the different techniques was found. Issues associated with deploying and comparing the techniques are discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
