Abstract
Geotechnical conditions such as tunnel dimensions, tunneling method and soil type are few factors influencing the ground movement or disturbance. This paper presents the effect of tunnel cover to diameter ratio and relative density of sand on surface settlement induced by tunneling using physical modelling. The aluminum casing with outer diameter of 50 mm was used to model the tunnel shield. The size of the casing was 2 mm diameter larger than the tunnel lining. The tunnel excavation was done by pulling out the tunnel shield at constant speed with a mechanical pulley. The tested variables are cover to diameter ratio (1, 2 and 3) and relative density of sand (30%, 50% and 75%). The results demonstrated that the surface settlement decreased as the relative density increased. Also, as the relative density of sand increased, the overload factor at collapse increased. The surface settlement was at the highest when the cover to diameter ratio was 2. It can be concluded that in greenfield condition, the relative density and cover to diameter ratio affect the surface settlement.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
