Abstract
This research proposes the surface roughness inspection by an adaptive Neuro-fuzzy inference system. The adaptive Neuro-fuzzy inference system model developed by input parameters (Speed, Depth of cut, feed rate, and Grayscale value) and an output parameter (surface roughness). The training and testing module, which is used to generate the surface roughness value. The grayscale value derived from the machinability of the Al7075 workpiece. The machined workpiece image as converted as grayscale value, which is feed into one of the inputs of the adaptive Neuro-fuzzy inference system. The vision measurement value was compared with the stylus probe value for predicting the accuracy level of the adaptive neuro-fuzzy inference system. The accuracy was above 98%, which is helpful for inspecting all machined components in the mass production system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.