Abstract
Sizing of surface-breaking cracks in metals by the AC field measurement (ACFM) technique by producing the surface field by inducing current into the specimen under test is considered. The surface potential distribution produced by an inducing mechanism around a long crack in a ferrous metal is formulated, and the crack signal, which is the variation of the potential difference around the crack, is investigated by varying the crack depth, the dimensions of the inducer, and the inducer's lift-off distance from the metal surface. The inducer consists of two parallel U-shaped wires symmetrically attached to the two sides of an ACFM probe. It is shown that the direct application of the one-dimensional formula based on the uniform field assumption for the interpretation of the crack signal gives rise to an underestimation of the crack depth. However, it is shown that the error in depth measurement by this formula can be negligible if the horizontal sections of the inducer's wires are sufficiently long.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.