Abstract
After being plasma carburized, the surface of AISI 316 austenitic stainless steel was covered with a layer of compact black thin-film. The surface polishing treatment, electrochemical brightening was carried out to remove the black thin-film and renew the original color of the stainless steel. The surface appearance, microstructures, micro hardness, surface roughness and corrosion resistance of the samples treated by electrochemical brightening process were analyzed. Experimental results show that the electrochemical brightening treatment can remove the black thin-film from and restore the original color of the plasma carburized stainless steel. After electrochemical brightening treatment, the thickness and surface hardness of the carburized layer were all decreased little, but the corrosion resistance was improved significantly. And the surface roughness (Ra) was lower than before. Therefore, the electrochemical surface brightening treatment can be used to improve the surface quality of the austenitic stainless steel treated by plasma carburizing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.