Abstract
A novel surface plasmon resonance (SPR) sensor based on specialty optical fiber having its cladding doped with Au nano-particles (NPs) was developed by modified chemical vapor deposition process. To optimize the SPR absorption and sensitivity of the fiber SPR sensor, effect of the fiber length (20 cm-90 cm) on sensing capability of refractive index (n = 1.418-1.448) was investigated. Absorption peaks appearing at 392 and 790 nm were due to SPR from Au NPs in the cladding region of the optical fiber. The SPR was found to occur at particular wavelengths around 390 nm for the corresponding refractive indices regardless of the length of the fiber, increased with the increase of the index. The measured SPR sensitivities (wavelength/RIU) of the fiber were estimated to be 407 nm/RIU, 217 nm/RIU, and 54 nm/RIU with the fiber lengths of 20 cm, 45 cm, and 90 cm, respectively. The SPR absorption intensity and FWHM decreased with the increase of the fiber length because the propagation loss of the signal through the fiber cladding region increased.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
