Abstract

In this study, we prepared different shapes of gold nanoparticles by seed-mediated growth method and applied them on the photoelectrodes of dye-sensitized solar cells (DSSCs) to study the surface plasma resonant (SPR) effect of gold nanoparticles on the photoelectrodes of dye-sensitized solar cells. The analyses of field emission scanning electron microscopy show that the average diameter of the spherical gold nanoparticles is 45 nm, the average length and width of the short gold nanorods were 55 and 22 nm, respectively, and the average length and width of the long gold nanorods were 55 and 14 nm, respectively. The aspect ratio of the short and long gold nanorods was about 2.5 and 4, respectively. The results of ultraviolet–visible absorption spectra show that the absorption wavelength is about 540 nm for spherical gold nanoparticles, and the absorption of the gold nanorods reveals two peaks. One is about 510 to 520 nm, and the other is about 670 and 710 nm for the short and long gold nanorods, respectively. The best conversion efficiency of the dye-sensitized solar cells with spherical gold nanoparticles and short and long gold nanorods added in is 6.77%, 7.08%, and 7.29%, respectively, and is higher than that of the cells without gold nanoparticles, which is 6.21%. This result indicates that the effect of gold nanoparticles on the photoelectrodes can increase the conductivity and reduce the recombination of charges in the photoelectrodes, resulting in the increase of conversion efficiency for DSSCs. In addition, the long gold nanorods have stronger SPR effect than the spherical gold nanoparticles and short gold nanorods at long wavelength. This may be the reason for the higher conversion efficiency of DSSCs with long gold nanorods than those of the cells with spherical gold nanoparticles and short gold nanorods.

Highlights

  • A new type of solar cell based on dye-sensitized nanocrystalline titanium dioxide has been developed by O'Regan and Grätzel [1]

  • This study shows that the power conversion efficiency η of the Dye-sensitized solar cells (DSSC) with a film of TiO2/Au on the working electrode always exceeds that of the conventional DSSCs due to the presence of the Schottky barrier [17]

  • We prepared different shapes of gold nanoparticles by seed-mediated growth method to apply on the photoelectrodes of the DSSCs

Read more

Summary

Introduction

A new type of solar cell based on dye-sensitized nanocrystalline titanium dioxide has been developed by O'Regan and Grätzel [1]. Dye-sensitized solar cells (DSSCs) based on nanocrystalline TiO2 electrodes are currently attracting widespread attention as a low-cost alternative to replace conventional inorganic photo voltaic devices [2,3,4,5,6]. We prepared different shapes of gold nanoparticles by seed-mediated growth method to apply on the photoelectrodes of the DSSCs. The gold nanoparticles and DSSCs were investigated by field emission scanning electron microscopy (FE-SEM), ultraviolet– visible (UV–vis) absorption spectra, current–voltage characteristics, electrochemical impedance spectroscopy (EIS), and incident photon conversion efficiency (IPCE) analyses to study the SPR effect of the gold nanoparticles on the photoelectrodes of the dye-sensitized solar cells

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call