Surface nano-structural modifications and characteristics in nitrogen ion implanted W as a function of temperature and N + energy

Abstract

The surface modifications of tungsten massive samples (0.5 mm foils) made by nitrogen ion implantation are studied by SEM, XRD, AFM, and SIMS. Nitrogen ions in the energy range of 16–30 keV with a fluence of 1 × 10 18 N + cm −2 were implanted in tungsten samples for 1600 s at different temperatures. XRD patterns clearly showed WN 2 (0 1 8) (rhombohedral) very close to W (2 0 0) line. Crystallite sizes (coherently diffracting domains) obtained from WN 2 (0 1 8) line, showed an increase with substrate temperature. AFM images showed the formation of grains on W samples, which grew in size with temperature. Similar morphological changes to that has been observed for thin films by increasing substrate temperature (i.e., structure zone model (SZM)), is obtained. The surface roughness variation with temperature generally showed a decrease with increasing temperature. The density of implanted nitrogen ions and the depth of nitrogen ion implantation in W studied by SIMS showed a minimum for N + density as well as a minimum for penetration depth of N + ions in W at certain temperatures, which are both consistent with XRD results (i.e., I W (2 0 0) / I W (2 1 1) ) for W (bcc). Hence, showing a correlation between XRD and SIMS results.