Surface modification of the p-type Cu2ZnSnS4 photocathode with n-type zinc oxide nanorods for photo-driven salt water splitting

Abstract

The sulfurization of co-sputtering Cu–Zn–Sn metal precursors was employed to prepare the quaternary copper-zinc-tin-sulphide (Cu2ZnSnS4, CZTS) photocathodes on substrates. Influence of [Zn]/[Sn] ratios in CZTS photocathodes on their phases, morphologies, and the efficiencies of photo-driven salt-water splitting was examined. Pristine p-type CZTS photocathodes showed the highest photo-driven performance of 0.61 mA cm−2 in an electrolyte containing 1 M sodium chloride with the external bias kept at −1.0 V vs. Ag/AgCl. An n-type zinc oxide (ZnO) nanorod arrays layer was then coated on the CZTS photocathode to improve its photo-driven salt-water splitting performance. The CZTS/ZnO photoelectrode had the best photo-driven performance of 1.87 mA cm−2 in the 1 M NaCl solution under illumination with the external bias set at −1.0 V vs. Ag/AgCl. From results of electrochemical impedance spectra measurements for the samples in the electrolyte, the CZTS/ZnO sample had good photo-driven salt-water splitting performance due to its lowest charge transfer resistance and p-n junction formed at the sample. Intensity modulated photocurrent spectroscopy and electrochemical impedance spectra results of samples indicated that the surface states at the CZTS/ZnO interface were the recombination centers with the electrons from the CZTS sample and holes from the ZnO and therefore improved its photo-driven salt-water splitting performance.