Surface modification of NiTi by plasma based ion implantation for application in harsh environments

Abstract

The substitution of conventional components for NiTi in distinct devices such as actuators, valves, connectors, stents, orthodontic arc-wires, e.g., usually demands some kind of treatment to be performed on the surface of the alloy. A typical case is of biomaterials made of NiTi, in which the main drawback is the Ni out-diffusion, an issue that has been satisfactorily addressed by plasma based ion implantation (PBII). Even though PBII can tailor selective surface properties of diverse materials, usually, only thin modified layers are attained. When NiTi alloys are to be used in the harsh space environment, as is the case of devices designed to remotely release the solar panels and antenna arrays of satellites, e.g., superior mechanical and tribological properties are demanded. For this case the thickness of the modified layer must be larger than the one commonly achieved by conventional PBII. In this paper, new nitrogen PBII set up was used to treat samples of NiTi in moderate temperature of 450°C, with negative voltage pulses of 7kV/250Hz/20μs, in a process lasting 1h. A rich nitrogen atomic concentration of 85at.% was achieved on the near surface and nitrogen diffused at least for 11μm depth. Tribological properties as well as corrosion resistance were evaluated.