Surface modification of cellulose fibers. II. The effect of cellulose fiber treatment on the performance of cellulose–polyester composites

Abstract

AbstractCellulose fibers treated with different coupling agents based on trichloro‐s‐triazine have been evaluated in terms of their reinforcement effect on unsaturated polyesters. The treatment with coupling agents containing double bonds resulted in what we believe to be the formation of covalent bonds between fiber and matrix. This has been compared with a treatment, which can only lead to formation of close interfacial molecular contact by wetting. The tensile properties of composites prepared from treated and untreated fibers were studied before and after exposure to water. It was found that all types of fiber treatment decreased water absorption and the reduction of mechanical properties in wet conditions, but that the degradation at the fiber/matrix interface which occurs from immersion in water and drying could only be avoided through the development of covalent bonds between fiber and matrix. Scanning electron microscopy was used to study the adhesion between fiber and matrix. An explanation of the reduction of mechanical properties of cellulose‐fiber reinforced polymers in wet conditions is proposed.