Abstract
Si 3 N 4 probes used for atomic force microscope exhibit large adhesion and friction resulting in artifacts of scanned image. In order to reduce adhesion and friction so as to reduce tip related artifacts, liquid lubricant (Z-TETRAOL) and fluorocarbon polymer (Fluorinert™) were applied on the Si3N4 probe. A comprehensive investigation of adhesion, friction, and wear of the uncoated/coated tips in both ambient air and various humidity levels as well as the influence of the coatings on the image resolution was performed. Experiments show that the coatings reduce the adhesion and friction of the Si3N4 tip, improve the initial image resolution, and exhibit less deterioration as compared to that of uncoated tip after scanning. The image degradation of an uncoated Si3N4 probe is also compared with that of an uncoated silicon probe. A probe cantilever deflection model was proposed to correlate the influence of the adhesion and friction with the image distortion.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
