Abstract
This paper gives the investigation on surface integrity of grinding of hardened bearing steel GCr15 with resin bonded cubic boron-nitride (CBN) wheels. CBN wheels, when well dressed, offer significant advantages compared with aluminium oxide wheels, especially at high metal-removal rates. The compressive residual stresses are only produced when CBN wheels are used, the harmful tensile residual stresses are formed very easily with aluminium oxide wheels. However, CBN wheels after dressing with SiC stick cannot get a good result, serious thermal damage and big surface roughness are induced on the ground surface. Two new dressing techniques— elastic dressing and ultrasonic vibration dressing have been advanced, they are successful in well dressing CBN wheels and make the wheels have a strong cutting capacity to obtain higher ground surface integrity. Our experiments show that in dry grinding of bearing steel GCr15 with CBN wheels boronization takes place, it can increase wear-resistance of the ground surface about 30%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
