Abstract
Background: The study was designed to test the angle independence of a dynamic three-dimensional digital colour Doppler method for laminar flow measurement. The technique acquired three-dimensional data by rotational acquisition and used surface integration of Doppler vector velocities and flow areas in time and space for flow computation. Method: A series of pulsatile flows (peak flow 55–180 ml/s) through a curved tube were studied with reference flow rates obtained using an ultrasonic flow meter. Colour Doppler imaging was performed at three angles to the direction of flow (20°, 30°, 40°), using a multiplane transoesophageal probe controlled by an ATL HDI 5000 system. Integration of digital velocity vectors over a curved three-dimensional surface across the tube for each of the 11 flow rates at each angle was performed off-line to compute peak flow. Results: Peak flow rates correlated closely (r=0·99) with the flow meter with the mean difference from the reference being −0·8±2·4 ml/s, 0·9±2·6 ml/s, 1·0±2·3 ml/s for 20°, 30° and 40° respectively. Comparison of the three angle groups showed no significant differences ( P =0·15, ANOVA). When sampled obliquely, the flow area on the curved surface increased while the velocities measured decreased. Conclusion: Surface integration of velocity vectors to compute three-dimensional Doppler flow data is less angle dependent than conventional Doppler methods.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
