Surface Engineering of Perovskite Single Crystals by Atomic Layer Deposited Tin Oxide for Optical Communication.

Abstract

Perovskite single crystals with excellent physical properties have broad prospects in the field of optoelectronics. However, the presence of dangling bonds, surface dislocations, and chemical impurities results in high surface defect density and sensitivity to humidity. Unfortunately, there are relatively few surface engineering strategies for single perovskite single crystals. We present a strategy utilizing atomic layer deposited SnOx to passivate surface defects in perovskite single crystals. The photodetector prepared based on the modified FAPbBr3 single crystals exhibits a low dark current of 1.89 × 10-9 A at a 5 V bias, close to 4 times lower with respect to the pristine device, a high detectivity of 2.3 × 1010 jones, and a fast response time of 27 μs. Moreover, the photodetectors feature long-term operational stability because the presence of a dense SnOx capping layer hinders the ingress of moisture and diffusion of ions. We further demonstrate the promise of our perovskite single crystal detectors for real-time subaqueous optical communication.