Abstract
Nichrome coatings have been deposited using the d.c. sputtering of the target (80% Ni–20% Cr wt.) by Ar+ ions at a working pressure of 10−1 Pa and at room temperature. After the air exposure of samples at room temperature, their phase composition and structure was studied by X-ray diffraction, while the surface elemental composition was determined by low energy ion scattering (LEIS) and Auger electron spectroscopy (AES). AES has been also used for the bulk composition analysis. There is a significant difference between the compositions of the surface and of the bulk. Surface segregation of chromium was observed using both LEIS and AES, and it was found that the chromium concentration increases with that of oxygen adsorbed at the surface during the air exposure. The nichrome surface composition is qualitatively the same as in the case of its exposure to O2 at room temperature, but significantly different from that of the thermally annealed nichrome to 400°C in air.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
