SURFACE CHEMICAL AND COLOR CHARACTERIZATION OF JUVENILETECTONA GRANDISWOOD SUBJECTED TO STEAM-DRYING TREATMENTS

Abstract

The color of Tectona grandis wood is an attribute that favors its commercialization, however, wood color from fast-growth plantation trees is clear and lacks uniformity. The aim of this work is to characterize steamed teak wood by means of the Fourier transform infrared spectroscopy (FTIR) and [Formula: see text] color systems. Two moisture conditions (green and 50%) and two grain patterns (flat and quarter) of boards were analyzed through the application of different steaming times (0, 3, 6, 9, 12, 15 and 18[Formula: see text]h). The FTIR results showed that the bands at 1158, 1231, 1373 and 1419[Formula: see text]cm[Formula: see text] did not show any change with steaming, whereas the bands at 1053, 1108, 1453, 1506, 1536, 1558, 1595, 1652, 1683, 1700 and 1733[Formula: see text]cm[Formula: see text] presented a decrease in the intensity with the steaming time. The band at 1318[Formula: see text]cm[Formula: see text] was the only one that increased. Lightness ([Formula: see text]) was the most affected parameter, followed by yellowness ([Formula: see text]), while redness ([Formula: see text]) showed the smallest change. Surface color change ([Formula: see text]) presented the lowest value between 3[Formula: see text]h and 6[Formula: see text]h of steam-drying in the boards with flat grain, whereas for boards with quarter grain, the smallest [Formula: see text] value was obtained after 18[Formula: see text]h of steaming.