Surface characterization study of a Pd/Co 3O 4 methane oxidation catalyst

Abstract

A surface characterization study using X-ray photoelectron spectroscopy (XPS) and ion scattering spectroscopy (ISS) has been performed on a 5 wt.% Pd/Co 3O 4 methane oxidation catalyst before and after exposure to a mixture of CH 4 and O 2 in N 2 at 250 °C for a period of 6 days. The primary peaks observed in the XPS survey spectra are the Co 2p, Pd 3d, O 1s and C 1s, along with Co, Pd and O Auger peaks. High-resolution Pd 3d spectra reveal that Pd exists on the surface predominantly as PdO, with no apparent change in chemical state during reaction. High-resolution XPS Co 2p and O 1s spectra reveal an accumulation of CoOOH and a depletion of CoO in the near-surface region during reaction. ISS analysis with intermittent 1-keV Ar + sputtering was used to obtain depth profiles from the catalyst before and after reaction. The results indicate that the Pd/Co concentration ratio decreases with sputtering and that this ratio is larger for the as-prepared catalyst indicating that morphological changes occur during reaction. The ISS depth profile spectra obtained from the catalyst after reaction indicates the presence of an oxyhydroxide layer throughout the near-surface region. This observation is consistent with the XPS data indicating accumulation of hydroxide and oxyhydroxide species at the surface during reaction. Based on these data and the results of related studies, a reaction mechanism is proposed. In this mechanism, methane dissociatively chemisorbs to form a surface methoxy species and CoOOH. The remaining hydrogen atoms are stripped from the methoxy species leaving an active adsorbed C species which reacts with surface oxygen and a hydroxyl group to form an adsorbed bicarbonate ion which then decomposes to form CO 2 and a surface hydroxyl group. These hydroxyl groups also react to form H 2O and then more O 2 adsorbs dissociatively at the vacant sites.