Abstract
In this study, the production of dual phase steel structure in the core of surface carburised AISI 8620 cementation steel and the effect of martensite volume fraction on tensile properties have been investigated. For these purposes, surface carburised (~0·8 wt-%C) specimens were oil quenched from 900°C to obtain a fully martensitic starting microstructure. Then specimens were oil quenched from intercritical annealing temperatures of 731 or 746°C to produce dual phase steel structure in the core of specimens with martensite fractions of ~25 or ~50 vol.-% and nearly wholly martensitic microstructure at the surface. Generally, specimens with dual phase microstructure in the core exhibited slightly lower tensile and yield strengths but superior ductility without sacrificing surface hardness than those specimens with fully martensitic microstructure in the core produced by using conventional heat treatment involving quenching from 850 to 950°C. Also tensile strength increased and ductility decreased with increasing martensite volume fraction.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
