Surface and Subsurface Cracks in Rolling Contact Fatigue of Hardened Components

Abstract

The competitive aspect of surface and subsurface fatigue crack propagation in hardened components subjected to rolling contact fatigue is highlighted, the former being greatly affected by the working conditions (in particular the presence of tangential stresses and lubricant), the latter depending mainly on the inclusions content and on the hardness profile. In order to determine which one of these kinds of damage is favoured, initial data consisting of contact load, rolling and sliding speed, theological properties of the lubricant, material hardness and inclusions content are necessary. The concurrent role of asperities and Hertzian stress field in determining surface crack propagation is explained with the approach of the “quiescent zone.” calculating the stress intensity factors range in a contact cycle and considering the pumping effect of the fluid possibly present on the contact surface. Inherent defects (especially oxides) are thought to be responsible for subsurface cracks origin and the Murakami formula for short cracks is extrapolated to describe their growth threshold, which also depends on the hardness and therefore on the depth in surface hardened components. A crack propagation index is then defined as a ratio of applied to threshold stress intensity factor, both for surface and subsurface cracks. Evaluating this index for a general operating condition, it is possible to determine which damage mechanism is favoured, taking into account the decisive effect of the hardness profile. Presented at the 57th Annual Meeting Houston, Texas May 19–23, 2002