Abstract
Surface-acoustic-wave (SAW) measurement techniques can be effectively used to determine the acoustic properties of dielectric and piezoelectric films. Such films can be used for the development of semiconductor-integrated microwave-frequency surface and bulk acoustic wave devices. The acoustic properties of silicon nitride, silicon oxynitride, silicon carbide, and TEOS glass, deposited by plasma-enhanced chemical-vapor-deposition (PECVD) on GaAs, have been characterized using linear arrays of SAW interdigital electrodes operating in the harmonic mode over the frequency region from 30 MHz to above 1.0 GHz. The elastic constants of these amorphous films have been determined by fitting theoretical dispersion curves to the measured SAW velocity characteristics. Frequency-dependent SAW propagation-loss values have been determined from the observed linear change in loss as a function of transducer separation. Preliminary measurements of the temperature coefficient of frequency (TCF) for SAW propagation of the films on GaAs are also given. >
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
