Surface acoustic wave characteristics of ZnO films grown on a polycrystalline 3C-SiC buffer layer

Abstract

Zinc oxide (ZnO) thin films were deposited onto a polycrystalline (poly) 3C-SiC buffer layer for surface acoustic wave (SAW) applications using a magnetron sputtering system. Atomic force microscopy (AFM) and X-ray diffraction (XRD) showed that the ZnO grown on 3C-SiC/Si had a smooth surface, a dominant c-axis orientation and a lower residual stress in ZnO thin film compared to that grown directly onto Si substrate. In order to evaluate the SAW characteristics of ZnO films on a 3C-SiC buffer layer, the two-port SAW resonators, based on inter-digital transducer (IDT)/ZnO/3C-SiC/Si and IDT/ZnO/Si structures, were fabricated and measured within a temperature range of 25–135 °C. The resulting 3C-SiC buffer layer improved the insertion loss by approximately 7.3 dB within the SAW resonator and enhanced the temperature stability with TCF = −22 ppm/°C up to 135 °C in comparison to that of TCF = −45 ppm/°C within a temperature range of 25–115 °C of the ZnO/Si structure.