Suppression of near‐surface scattered body‐to‐surface waves: a steerable and nonlinear filtering approach

Abstract

ABSTRACTWe present an approach based on local‐slope estimation for the separation of scattered surface waves from reflected body waves. The direct and scattered surface waves contain a significant amount of seismic energy. They present great challenges in land seismic data acquisition and processing, particularly in arid regions with complex near‐surface heterogeneities (e.g., dry river beds, wadis/large escarpments, and karst features). The near‐surface scattered body‐to‐surface waves, which have comparable amplitudes to reflections, can mask the seismic reflections. These difficulties, added to large amplitude direct and back‐scattered surface (Rayleigh) waves, create a major reduction in signal‐to‐noise ratio and degrade the final sub‐surface image quality. Removal of these waves can be difficult using conventional filtering methods, such as an filter, without distorting the reflected signal. The filtering algorithm we present is based on predicting the spatially varying slope of the noise, using steerable filters, and separating the signal and noise components by applying a directional nonlinear filter oriented toward the noise direction to predict the noise and then subtract it from the data. The slope estimation step using steerable filters is very efficient. It requires only a linear combination of a set of basis filters at fixed orientation to synthesize an image filtered at an arbitrary orientation. We apply our filtering approach to simulated data as well as to seismic data recorded in the field to suppress the scattered surface waves from reflected body waves, and we demonstrate its superiority over conventional techniques in signal preservation and noise suppression.