Abstract
The boiling liquid expanding vapor explosion (BLEVE) is a most severe hazard in liquefied gas storage and transportation, and its prevention depends on the suppression of the explosive boiling during tank depressurization. This paper proposes an idea of using micro-fin type surface to suppress the explosive boiling, and experimentally investigates the suppression mechanisms and quantitative effects on the explosive boiling. In the experiments, the bubble behaviors on a micro-fin and a smooth surface are observed for phenomenal analysis, and the explosive boiling consequences of the two surfaces are measured for quantitative evaluation. The results show that, the micro-fin surface brings forward the nucleation onset and reduces the boiling region, resulting in a weakened explosive boiling process. Among release pressures of 200 kPa-500 kPa and vent areas of 1.8 cm2-5.3 cm2, the adopted micro-fin surface reduces the boiling-induced pressure rise and the released energy by up to 24.5% and 35.6%, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.